There is nothing more pressing than when you try to rush out for work but realize your TVS iQube won’t start.
I remember standing there with my helmet in hand, staring at the silent scooter like it had betrayed me. At first, I panicked naturally. But then, I thought, why should I not try fixing it myself?
In this blog, I’ll be sharing step-by-step DIY fixes based on my real-world experience. If your TVS iQube not starting is driving you crazy too, maybe my story is the perfect help!
Step-by-Step Fixes to Start Your TVS iQube
Let us jump right into the step-by-step fixes I tried for my iQube:
1. Charging the Battery Properly
The first thing on my mind was to check the battery. On the TVS app and dashboard, the charge level looked suspiciously low.
I then grabbed my original charger that came with the scooter. Using third-party chargers is one of the leading causes of damaged batteries.
I, thus, avoid such products or any fast-charging hacks recommended by strangers online. Fast charging can seriously damage the battery life of the scooter by up to 20% (I am not willing to take this risk).
I plugged the charger in and waited patiently for the scooter to charge up to the maximum. Once it was fully charged, I tried starting it again. The TVS iQube ignition problem was still there; I think it is time to deploy Plan B.
2. Troubleshooting the Key and App
Next, I thought about the key or app being the issue. My TVS iQube key not working properly had happened once before. This was when the battery inside the key fob went weak.
I reset the RFID key by following the pairing steps mentioned in the user manual. It is super simple. Just a few taps on the buttons, and it paired again.
Now, I reinstalled the TVS iQube app on my phone and refreshed the Bluetooth connection. To my surprise, a lot of people online mentioned that Bluetooth bugs could cause TVS iQube not to start.
As a good measure, I even tried using the spare key that came with the scooter. No luck yet, but I feel like I am moving closer to the issue!
3. Rebooting the System
With some online digging, I learned that sometimes you just have to reboot the system (this is a lot like restarting a frozen phone).
So, I turned off the scooter and disconnected the battery. I left it in this state for about 5 minutes.
Upon reconnecting everything, the digital console is reset by holding the power button for about 10 seconds. Guess what? The dashboard lit up now!
If your TVS iQube dashboard not turning on, this is the one trick you should definitely go for.
4. Fixing the “Close Throttle Warning”
When it powered it up, the screen now flashed a new error. This was the “Close Throttle Warning”. I researched and found that the throttle sensor sometimes gets stuck due to dust. About 40% of EV issues are dust-related!
I began by spraying a little silicone lubricant around the throttle joint. You can find a good silicone spray at any reputable hardware store. Then, I manually twisted the throttle back and forth about 30-40 times to reset it.
This worked for a few rides, but the warning kept coming back. Over time, I had to replace the throttle assembly after all. Honestly, it is better to get this procedure done professionally if you are not acquainted with wires.
If you are dealing with a similar TVS iQube self start issue, try lubricating before you rush into replacing anything.
5. Inspecting Hardware Connections
Finally, I got my hands dirty checking under the seat and battery compartment.
First, I took a look at the battery terminals. One of them had slight corrosion, so a quick clean-up with baking soda paste and a cloth fixed it. Then, I checked the wiring near the motor and controller. No loose wires here, but I did spot one area that looked exposed to water. Water damage is a common issue in EVs during rainy seasons.
Thankfully, drying this area with a hairdryer and sealing the exposed part with waterproof tape went a long way for me.
After all this, my scooter finally started! No more TVS iQube not starting headaches.
Final Thoughts
Fixing my TVS iQube, which was not starting, felt like a mini-win. Everything from charging the battery to the maximum to inspecting hardware connections was an important step.
By following the above TVS iQube starting issues solutions and with patience and some basic tools, you can definitely fix your e-scooter. But if in doubt, professional help is always an option!
I hope my experience helps you get back on the road safely.
